Development of heat sink with ionic wind for LED cooling

Dong Ho Shin; Soo Hong Baek; Han Seo Ko

doi:10.1016/j.ijheatmasstransfer.2015.10.029

Development of heat sink with ionic wind for LED cooling

Dong Ho Shin, Soo Hong Baek, Han Seo Ko

Department of Mechanical, Robotics and Energy Engineering

Sungkyunkwan University

Research output: Contribution to journal › Article › peer-review

76 Scopus citations

Abstract

A heat sink with ionic wind has been developed in this study for a new cooling device of a Light Emitting Diode (LED). The characteristics of the ionic wind using wire to parallel-plate-electrodes were analyzed using the Computational Fluid Dynamics (CFD) technique suggested in this study. Also, the cooling performance of the heat sink applied by the impinging flow of the ionic wind was investigated by parametric studies. The CFD results were verified from the experimental results of the ionic wind velocity and temperature. A developed prototype of the heat sink with the ionic wind was then manufactured and tested for its cooling performance. Finally, the advantages of the heat sink with the ionic wind for cooling the LED were confirmed.

Original language	English
Pages (from-to)	516-528
Number of pages	13
Journal	International Journal of Heat and Mass Transfer
Volume	93
DOIs	https://doi.org/10.1016/j.ijheatmasstransfer.2015.10.029
State	Published - 1 Feb 2016

Keywords

Cooling performance
Energy efficiency
Heat sink
Ionic wind
LED

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

Access to Document

10.1016/j.ijheatmasstransfer.2015.10.029

Cite this

@article{2c0ddc16366a4fe49b543f3b01312297,

title = "Development of heat sink with ionic wind for LED cooling",

abstract = "A heat sink with ionic wind has been developed in this study for a new cooling device of a Light Emitting Diode (LED). The characteristics of the ionic wind using wire to parallel-plate-electrodes were analyzed using the Computational Fluid Dynamics (CFD) technique suggested in this study. Also, the cooling performance of the heat sink applied by the impinging flow of the ionic wind was investigated by parametric studies. The CFD results were verified from the experimental results of the ionic wind velocity and temperature. A developed prototype of the heat sink with the ionic wind was then manufactured and tested for its cooling performance. Finally, the advantages of the heat sink with the ionic wind for cooling the LED were confirmed.",

keywords = "Cooling performance, Energy efficiency, Heat sink, Ionic wind, LED",

author = "Shin, {Dong Ho} and Baek, {Soo Hong} and Ko, {Han Seo}",

year = "2016",

month = feb,

day = "1",

doi = "10.1016/j.ijheatmasstransfer.2015.10.029",

language = "English",

volume = "93",

pages = "516--528",

journal = "International Journal of Heat and Mass Transfer",

issn = "0017-9310",

publisher = "Elsevier Ltd",

}

TY - JOUR

T1 - Development of heat sink with ionic wind for LED cooling

AU - Shin, Dong Ho

AU - Baek, Soo Hong

AU - Ko, Han Seo

PY - 2016/2/1

Y1 - 2016/2/1

N2 - A heat sink with ionic wind has been developed in this study for a new cooling device of a Light Emitting Diode (LED). The characteristics of the ionic wind using wire to parallel-plate-electrodes were analyzed using the Computational Fluid Dynamics (CFD) technique suggested in this study. Also, the cooling performance of the heat sink applied by the impinging flow of the ionic wind was investigated by parametric studies. The CFD results were verified from the experimental results of the ionic wind velocity and temperature. A developed prototype of the heat sink with the ionic wind was then manufactured and tested for its cooling performance. Finally, the advantages of the heat sink with the ionic wind for cooling the LED were confirmed.

AB - A heat sink with ionic wind has been developed in this study for a new cooling device of a Light Emitting Diode (LED). The characteristics of the ionic wind using wire to parallel-plate-electrodes were analyzed using the Computational Fluid Dynamics (CFD) technique suggested in this study. Also, the cooling performance of the heat sink applied by the impinging flow of the ionic wind was investigated by parametric studies. The CFD results were verified from the experimental results of the ionic wind velocity and temperature. A developed prototype of the heat sink with the ionic wind was then manufactured and tested for its cooling performance. Finally, the advantages of the heat sink with the ionic wind for cooling the LED were confirmed.

KW - Cooling performance

KW - Energy efficiency

KW - Heat sink

KW - Ionic wind

KW - LED

UR - http://www.scopus.com/inward/record.url?scp=84949579998&partnerID=8YFLogxK

U2 - 10.1016/j.ijheatmasstransfer.2015.10.029

DO - 10.1016/j.ijheatmasstransfer.2015.10.029

M3 - Article

AN - SCOPUS:84949579998

SN - 0017-9310

VL - 93

SP - 516

EP - 528

JO - International Journal of Heat and Mass Transfer

JF - International Journal of Heat and Mass Transfer

ER -

Development of heat sink with ionic wind for LED cooling

Abstract

Keywords

UN SDGs

Access to Document

Other files and links

Fingerprint

Cite this