Skip to main navigation Skip to search Skip to main content

Enhanced mobility of Cu4SnS4 films prepared by annealing SnS–CuS stacks in a graphite box

  • Yeungnam University

Research output: Contribution to journal › Article › peer-review

22 Scopus citations

Abstract

High-quality Cu4SnS4 thin films are prepared by annealing chemical bath-deposited SnS–CuS stacks in a graphite box. The effects of annealing temperature on the grain growth and morphology of these films are investigated in this study. Results showed that the films prepared at 500–580 °C yielded an orthorhombic crystal structure with lattice parameters a = 1.371 nm, b = 0.766 nm and c = 0.643 nm, a crystallite size of 260 nm, an increased grain size from 2 μm to greater than 6 μm, a direct optical band gap of 1.0 eV, and p-type electrical conductivity. The films prepared at 550 °C and 580 °C exhibited a relatively high hole mobility of 150 cm2V−1s−1. These properties suggest that the films developed in this study can yield reasonable device efficiency when used as solar cell absorber layers.

Original languageEnglish
Pages (from-to)336-341
Number of pages6
JournalSolar Energy
Volume155
DOIs
StatePublished - 2017

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

  1. SDG 7 - Affordable and Clean Energy
    SDG 7 Affordable and Clean Energy

Keywords

  • Chemical bath deposition
  • CuSnS thin films
  • Electrical properties
  • Raman analysis
  • X-ray diffraction

Fingerprint

Dive into the research topics of 'Enhanced mobility of Cu4SnS4 films prepared by annealing SnS–CuS stacks in a graphite box'. Together they form a unique fingerprint.

Cite this