Maximum transmit power for ue in an lte small cell uplink

Amir Haider, Seung Hoon Hwang

Research output: Contribution to journalArticlepeer-review

18 Scopus citations

Abstract

To furnish the network with small cells, it is vital to consider parameters like cell size, interference in the network, and deployment strategies to maximize the network’s performance gains expected from small cells. With a small cell network, it is critical to analyze the impact of the uplink power control parameters on the network’s performance. In particular, the maximum transmit power (Pmax) for user equipment (UE) needs to be revisited for small cells, since it is a major contributor towards interference. In this work, the network performance was evaluated for different Pmax values for the small cell uplink. Various deployment scenarios for furnishing the existing macro layer in LTE networks with small cells were considered. The Pmax limit for a small cell uplink was evaluated for both homogenous small cell and heterogeneous networks (HetNet). The numerical results showed that it would be appropriate to adopt Pmax = 18 dBm in uniformly distributed small cells rather than Pmax = 23 dBm, as in macro environments. The choice of Pmax = 18 dBm was further validated for three HetNet deployment scenarios. A decrease of 0.52 dBm and an increase of 0.03 dBm and 3.29 dBm in the proposed Pmax = 18 dBm were observed for the three HetNet deployments, respectively. Furthermore, we propose that the fractional power control mode can be employed instead of the full compensation mode in small cell uplinks.

Original languageEnglish
Article number796
JournalElectronics (Switzerland)
Volume8
Issue number7
DOIs
StatePublished - Jul 2019

Keywords

  • Interference
  • Maximum transmit power
  • Open-loop power control
  • Small cell
  • UE

Fingerprint

Dive into the research topics of 'Maximum transmit power for ue in an lte small cell uplink'. Together they form a unique fingerprint.

Cite this